DJI Neo 2 - Motion Fly More Combo with RC Motion 3 & Goggles N3, Stable Transmission with Digital Transceiver, 4K Drone for Beginners, FPV Flying, 3 Batteries

Technical Details

Usage Instruction:

1. Pre-Flight Preparation:

   • Fully charge all three batteries using the included charger.

   • Insert a battery into the drone until it clicks into place.

   • Ensure the propellers are securely attached and free from damage.

   • Power on the RC Motion 3 and Goggles N3, then power on the drone.

2. Palm Takeoff:

   • Place the drone flat in your palm with the propellers facing upward.

   • Ensure your hand is steady and clear of obstacles.

   • Follow the on-screen prompts in the goggles or use the gesture control to initiate palm takeoff. The drone will gently lift off and hover.

3. Flight Control:

   • Use the RC Motion 3 controller to navigate the drone. The motion-sensing design allows for intuitive control—tilt the controller to steer.

   • For hands-free operation, use gesture controls: specific hand gestures can trigger takeoff, landing, and basic flight movements.

4. Capturing Photos & Videos:

   • Use SelfieShot mode by tapping the designated button for quick selfies.

   • Use ActiveTrack to lock onto a subject (person, pet, or object) for smooth, automatic tracking.

   • For manual capture, use the controls on the RC Motion 3 or gesture commands to start/stop recording and take photos.

5. Obstacle Avoidance:

   • The omnidirectional obstacle sensing system provides visual and audible warnings when objects are detected near the drone.

   • If an obstacle is detected, the drone will automatically slow down or stop to prevent collision.

6. Palm Landing:

   • To land, position the drone above your open palm.

   • Use the gesture control or follow the prompts in the goggles to initiate landing. The drone will descend gently into your palm.

   • Once landed, power off the drone and remove the battery.

7. Post-Flight:

   • Remove the battery and store it in a cool, dry place.

   • Clean the propellers and body with a soft, dry cloth.

   • Charge batteries for the next flight.

Safety Warning

• Battery Safety: Use only the provided DJI batteries and charger. Do not expose batteries to fire, extreme heat, or puncture them. Lithium Polymer batteries can pose a fire risk if mishandled. Never leave charging batteries unattended.

• Flight Safety: Always fly in open areas away from people, animals, power lines, trees, and buildings. Do not fly near airports, military bases, or restricted airspace. Adhere to all local drone regulations.

• Obstacle Sensing Limitation: While equipped with omnidirectional obstacle sensing, the system may not detect all obstacles, especially small objects (e.g., wires, thin branches), reflective surfaces, or in low-light conditions. Always maintain visual line of sight and fly cautiously.

• Propeller Hazard: Keep hands, hair, and loose clothing away from propellers when the drone is powered on. The propellers rotate at high speed and can cause injury.

• Temperature: Do not operate the drone in extreme temperatures outside the recommended range. Cold weather can reduce battery performance, and hot weather may affect electronics.

• Eye Safety: Do not stare directly at the LED lights on the drone or goggles for prolonged periods.

Manufacturer Name: SZ DJI Technology Co., Ltd.

Postal Address: T2 Lobby, DJI Sky City, No. 53 Xianyuan Road, Xili Community, Xili Street, Nanshan District, Shenzhen, Guangdong Province, 518055, China

Official Website: WWW.DJI.COM